收藏本站
again, perform the following steps while the USB Multilink Universal interface is plugged into the computer:
1.
2.
3.
4.
5.
6.
7.
Open the Control Panel: Start Button [ ->Settings ] ->Control Panel. (You will not need to select “Settings” on
Vista and Windows 7).
Double Click the “System” Icon. (Windows 7: “System and Security”)
Select the “Hardware” Tab. (Windows 7: “Hardware and Sound”, Windows Vista: skip this step)
Click the “Device Manager” Button. (Windows 7: “Devices and Printers -> Device Manager”)
The “USB Multilink 2.0” device will be shown with an exclamation point next to it. Double-click this device.
Click the “Reinstall Driver…” button and follow the dialog instructions to have Windows automatically install
the driver. (Windows 7: First click the “Driver” tab, then select “Update Driver...”)
If the hardware still has a yellow exclamation mark next to it, right click on it and select uninstall. The USB
Multilink should disappear from the list. Unplug the USB Multilink and then plug it into the PC again. A new
Hardware Found dialog will pop up; follow the dialog instructions and have Windows automatically install the
driver.
4
5
Connecting To The Target
The following is the proper connection sequence to connect the PC to the target system via the USB Multilink
Universal interface:
1. Make sure the target power is OFF and the USB Multilink Universal is not connected to either the target or
the PC
2. Open the Multilink and connect a ribbon cable from the correct Multilink port to the target. Make sure that the
ribbon cable is plugged into the target with the proper orientation. PIN 1 is indicated by a 1 next to the port.
3. Connect the USB Multilink to the PC via a USB cable. The Blue LED on the Multilink should become lit.
4. Turn the target power on. The Yellow LED on the Multilink should become lit.
Before disconnecting the setup, turn the target power off.
Startup Reset Sequence
Note that if the device does not enter debug mode, the program issues the error message “Cannot enter
background mode.” If you receive this message you should check your hardware with a scope, logic analyzer or
logic probe. First check for power on, then check to make sure the processor oscillator is running. Finally, look for
the startup sequence for your microprocessor that is listed below.
Port A – JTAG/ONCE – Qorivva MPC55xx/56xx, Power Architecture PX Series, DSC
a. RESET (Pin-9) is driven low (to processor).
b. Activity appears on TCLK (Pin-5), TDI (Pin-1) and TDO (Pin-3). (PC software instructs the
processor to enable debug mode).
c. RESET (Pin-9) is released by the interface and will go high.
d. Activity appears on TCLK (Pin-5), TDI (Pin-1) and TDO (Pin-3). (Debug activity).
Ports B, F, G – ARM JTAG– Kinetis
a. RESET is driven low (to processor).
b. Activity appears on TCLK, TDI and TDO (PC software instructs the processor to enable
debug mode).
c. RESET is released by the interface and will go high.
d. Activity appears on TCLK , TDI and TDO (Debug activity).
Port C – BDM
RS08, HCS08, S12Z, ColdFire V1
a. Debug activity is seen on BKGD (Pin-1).
Technical Summary For USB-ML-UNIVERSAL Rev. A
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
U2D-MIPS USB2DEMON BDM/JTAG MIPS
UBA2032TS/N2,118 IC DRIVER FULL BRIDGE 28-SSOP
UBA2033TS/N2,118 IC FULL BRIDGE DRIVER 28-SSOP
UBA3070T/N1,118 IC LED DVR WHITE BCKLGT 8-SOIC
UEVM4430G-01-00-00 PANDABOARD
UEVM4460G-02-01-00 PANDABOARD ES
UHDM7218BPA PLATE BARRIER 71.86X17.87" GRY
UHDM7218ECA PLATE END 71.86X17.87" GREY
相关代理商/技术参数
U-MULTILINK 制造商:Freescale Semiconductor 功能描述:UNIV USB MULTILINK DEBUGGER/PROG 制造商:Freescale Semiconductor 功能描述:UNIV USB MULTILINK, DEBUGGER/PROG
U-MULTILINK-FX 功能描述:程序设计器 - 基于处理器 Univ MultilinkFX RoHS:否 制造商:Olimex Ltd. 产品:Programmers 工具用于评估:XMEGA, MegaAVR, tinyAVR 核心:AVR 接口类型:USB 工作电源电压:1.8 V to 5.5 V
UMV0G101MFD 功能描述:铝质电解电容器 - 带引线 4volts 100uF 6.3x5 20% 2.5LS RoHS:否 制造商:Kemet 引线类型: 电容:220 uF 容差:20 % 电压额定值:25 V 工作温度范围: 端接类型:Radial 外壳直径:8 mm 外壳长度:11 mm 引线间隔:5 mm 产品:General Purpose Electrolytic Capacitors 封装:Bulk
UMV0G101MFD1TP 制造商:Nichicon Corporation 功能描述:CAP ALUM 100UF 4V 20% RADIAL
UMV0G220MFD 功能描述:铝质电解电容器 - 带引线 4volts 22uF 4x5 20% 1.5LS RoHS:否 制造商:Kemet 引线类型: 电容:220 uF 容差:20 % 电压额定值:25 V 工作温度范围: 端接类型:Radial 外壳直径:8 mm 外壳长度:11 mm 引线间隔:5 mm 产品:General Purpose Electrolytic Capacitors 封装:Bulk
UMV0G220MFD1TP 功能描述:22μF 4V Aluminum Capacitors Radial, Can 5000 Hrs @ 105°C 制造商:nichicon 系列:UMV 包装:剪切带（CT） 零件状态:有效 电容:22μF 容差:±20% 额定电压:4V ESR（等效串联电阻）:- 不同温度时的使用寿命:105°C 时为 5000 小时 工作温度:-40°C ~ 105°C 极化:- 应用:通用 纹波电流:22mA 阻抗:- 引线间距:0.059"（1.50mm） 大小/尺寸:0.157" 直径（4.00mm） 高度 - 安装（最大值）:0.236"（6.00mm） 表面贴装焊盘尺寸:- 安装类型:通孔 封装/外壳:径向，Can 标准包装:1
UMV0G330MFD 功能描述:铝质电解电容器 - 带引线 4volts 33uF 5x5 20% 2LS RoHS:否 制造商:Kemet 引线类型: 电容:220 uF 容差:20 % 电压额定值:25 V 工作温度范围: 端接类型:Radial 外壳直径:8 mm 外壳长度:11 mm 引线间隔:5 mm 产品:General Purpose Electrolytic Capacitors 封装:Bulk
UMV0G330MFD1TP 功能描述:33μF 4V Aluminum Capacitors Radial, Can 5000 Hrs @ 105°C 制造商:nichicon 系列:UMV 包装:剪切带（CT） 零件状态:有效 电容:33μF 容差:±20% 额定电压:4V ESR（等效串联电阻）:- 不同温度时的使用寿命:105°C 时为 5000 小时 工作温度:-40°C ~ 105°C 极化:- 应用:通用 纹波电流:30mA 阻抗:- 引线间距:0.079"（2.00mm） 大小/尺寸:0.197" 直径（5.00mm） 高度 - 安装（最大值）:0.236"（6.00mm） 表面贴装焊盘尺寸:- 安装类型:通孔 封装/外壳:径向，Can 标准包装:1